Iei-integration ICE-DB-T6 Manual do Utilizador descarregar pdf (Página 34)

Type 6 Carrier Board Design Guide

Page 24

Figure 3-2: Intel Recommend Test Structure for PCI Express Data Eye Measurement

3.1.5 PCI Express Routing Guideline

3.1.5.1 Impedance Consideration

The PCI Express impedance considerations are listed in Table 3-2.

Table 3-2: PCI Express Impedance Consideration

Parameters Routing

Transfer Rate / PCIe Lane 2.5 Gbits/sec

Maximum signal line length (coupled traces) TX and RX path: 21.0 inches

Maximum signal length allowance on the

COM Express module "

TX and RX path: 5.15 inches

Signal length allowance on the COM

Express carrier board "

TX and RX path: 15.85 inches @

0.28dB/GHz/inch to PCIe device 9.00 inches

@ 0.28dB/GHz/inch to PCIe slot

Differential Impedance 100 Ohms +/-20%

Single-ended Impedance 55 Ohms +/-15%

Trace width (W) 5 mils (microstrip routing) (*)

Spacing between differential pairs (intra-pair)

(S)

4 mils (microstrip routing) (*)

Spacing between RX and TX pairs

(inter-pair) (s)

Min. 20mils

Spacing between differential pairs and

high-speed periodic signals

Min. 50mils

Spacing between differential pairs and

low-speed non periodic signals

Min. 20mils

Length matching between differential pairs

(intra-pair)

Max. 5mils

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 128 129

Sem comentários

Iei-integration ICE-DB-T6 Manual do Utilizador Página 34