Iei-integration IMBA-Q670 v2.01 Manual do Utilizador

IMBA-Q670 ATX Motherboard Page iIEI Technology Corp. User Manual MODEL: IMBA-Q670 ATX LGA1155 Motherboard for Intel® Core™ i7/i5/i3 Quad/Dual Core

IMBA-Q670 ATX MotherboardPage x Figure 3-27: External Peripheral Interface Connector ...4

IMBA-Q670 ATX MotherboardPage 84 Î USB Support [Enabled] Use the USB Support option to enable or disable USB support on the system. Î Disabled USB

IMBA-Q670 ATX Motherboard Page 855.3.7 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 10) to set or change the configurations

IMBA-Q670 ATX MotherboardPage 86 5.3.7.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial

IMBA-Q670 ATX Motherboard Page 87Î IO=3F8h; IRQ=3, 4 Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4 Î IO=2F8h; IRQ=3, 4

IMBA-Q670 ATX MotherboardPage 88 Î IO=2C8h; IRQ=3, 4 Serial Port I/O port address is 2C8h and the interrupt address is IRQ3, 4 5.3.7.1.3 Serial Po

IMBA-Q670 ATX Motherboard Page 895.3.7.1.4 Serial Port 4 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the

IMBA-Q670 ATX MotherboardPage 90 5.3.7.1.5 Serial Port 5 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the

IMBA-Q670 ATX Motherboard Page 91Î Disabled Disable the serial port Î Enabled DEFAULT Enable the serial port Î Change Settings [Auto] Use the Chan

IMBA-Q670 ATX MotherboardPage 92 5.3.7.2 Parallel Port Configuration Use the Parallel Port Configuration menu (BIOS Menu 11) to configure the serial

IMBA-Q670 ATX Motherboard Page 93Î IO=3BCh; IRQ=7 Parallel Port I/O port address is 3BCh and the interrupt address is IRQ7 Î Device Mode [Printer

IMBA-Q670 ATX Motherboard Page xiFigure 6-11: Graphics Driver Setup Operations...

IMBA-Q670 ATX MotherboardPage 94 Î PC Health Status The following system parameters and values are shown. The system parameters that are monitored

IMBA-Q670 ATX Motherboard Page 95Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status CPU Sm

IMBA-Q670 ATX MotherboardPage 96 Î System Temperature1 Sets the target temperature sensor to the System Temperature1 setting. Î System Temperature2

IMBA-Q670 ATX Motherboard Page 97Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status CPU Sm

IMBA-Q670 ATX MotherboardPage 98 Î System Temperature1 Sets the target temperature sensor to the System Temperature1 setting. Î System Temperature2

IMBA-Q670 ATX Motherboard Page 99Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced COM1 Console Redirectio

IMBA-Q670 ATX MotherboardPage 100 Î ANSI The target terminal type is ANSI Î Bits per second [115200] Use the Bits per second option to specify the

IMBA-Q670 ATX Motherboard Page 101Î Disabled DEFAULT Auto recovery function disabled Î Enabled Auto recovery function enabled 5.4 Chipset Use the C

IMBA-Q670 ATX MotherboardPage 102 5.4.1 Northbridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 19) to configure the Nor

IMBA-Q670 ATX Motherboard Page 103Î IGD Memory [64 M] Use the IGD Memory option to specify the amount of system memory that can be used by the Inte

IMBA-Q670 ATX MotherboardPage xii Figure B-7: Manual Recovery Environment for Windows ... 158 Figu

IMBA-Q670 ATX MotherboardPage 104 Î 480 M 480 MB of memory used by internal graphics device Î 512 M 512 MB of memory used by internal graphics d

IMBA-Q670 ATX Motherboard Page 105Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Auto Power Button Status

IMBA-Q670 ATX MotherboardPage 106 Î GbE PXE Boot [Enabled] Use the GbE PXE Boot option to enable or disable the boot option for GbE devices. Î Disa

IMBA-Q670 ATX Motherboard Page 107Î Disabled Disables Resume on Ring option Î Enabled DEFAULT Enables Resume on Ring option Î Resume on PS/2 [Enab

IMBA-Q670 ATX MotherboardPage 108 Î PCIe LAN PXE Boot [Disabled] Use the PCIe LAN PXE Boot option to enable or disable the boot option for the PCIe

IMBA-Q670 ATX Motherboard Page 109Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel IGD SWSCI OpRegio

IMBA-Q670 ATX MotherboardPage 110  AUTO DEFAULT  CRT  DVI  HDMI 5.4.4 ME Subsystem Use the ME Subsystem menu (BIOS Menu 22) to configure

IMBA-Q670 ATX Motherboard Page 111Î Unconfigure AMT/ME [Disabled] Use the Unconfigure AMT/ME option to perform AMT/ME unconfigure without password

IMBA-Q670 ATX MotherboardPage 112 Î Off Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Numbe

IMBA-Q670 ATX Motherboard Page 1135.6 Security Use the Security menu (BIOS Menu 24) to set system and user passwords. Aptio Setup Utility – Copyrigh

IMBA-Q670 ATX Motherboard Page xiiiFigure B-42: Disable Automatically Restart...

IMBA-Q670 ATX MotherboardPage 114 5.7 Exit Use the Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configu

IMBA-Q670 ATX Motherboard Page 115Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Î

IMBA-Q670 ATX MotherboardPage 116 6 Software Drivers Chapter 6

IMBA-Q670 ATX Motherboard Page 1176.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and

IMBA-Q670 ATX MotherboardPage 118 Figure 6-1: Introduction Screen Step 3: Click IMBA-Q670. Step 4: A new screen with a list of available drivers

IMBA-Q670 ATX Motherboard Page 119Step 5: Install all of the necessary drivers in this menu. Step 0: 6.3 Chipset Driver Installation To install t

IMBA-Q670 ATX MotherboardPage 120 Figure 6-4: Chipset Driver Welcome Screen Step 7: The license agreement in Figure 6-5 appears. Step 8: Read the

IMBA-Q670 ATX Motherboard Page 121Step 11: Click Next to continue. Figure 6-6: Chipset Driver Read Me File Step 12: Setup Operations are performed

IMBA-Q670 ATX MotherboardPage 122 Step 14: The Finish screen in Figure 6-8 appears. Step 15: Select “Yes, I want to restart this computer now” and c

IMBA-Q670 ATX Motherboard Page 123 Figure 6-9: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-10 appears. Step 7: Click

IMBA-Q670 ATX MotherboardPage xiv List of Tables Table 1-1: IMBA-Q670 Specifications ...

IMBA-Q670 ATX MotherboardPage 124 Step 9: Once the Setup Operations are complete, click Next to continue. Figure 6-11: Graphics Driver Setup Opera

IMBA-Q670 ATX Motherboard Page 1256.5 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list. (

IMBA-Q670 ATX MotherboardPage 126 Figure 6-14: LAN Driver Welcome Screen Step 7: Click Next to continue. Step 8: The License Agreement in Figure

IMBA-Q670 ATX Motherboard Page 127Step 11: The Setup Options screen in Figure 6-16 appears. Step 12: Select program features to install. Step 13: Cl

IMBA-Q670 ATX MotherboardPage 128 Figure 6-17: LAN Driver Installation Step 16: The program begins to install. Step 17: When the driver installatio

IMBA-Q670 ATX Motherboard Page 1296.6 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver lis

IMBA-Q670 ATX MotherboardPage 130 Figure 6-20: Audio Driver Welcome Screen Step 7: The audio driver installation begins. See Figure 6-21. Figure

IMBA-Q670 ATX Motherboard Page 1316.7 USB 3.0 Driver Installation To install the touch panel software driver, please follow the steps below. Step 1:

IMBA-Q670 ATX MotherboardPage 132 Figure 6-24: USB 3.0 Driver License Agreement Step 9: Browse for an install location or use the one suggested (F

IMBA-Q670 ATX Motherboard Page 133 Figure 6-26: USB 3.0 Driver Installation Step 13: The Install screen appears and displays the progress of the ins

IMBA-Q670 ATX Motherboard Page xvTable 3-28: Serial Port Connector Pinouts ...

IMBA-Q670 ATX MotherboardPage 134 6.8 Intel® AMT Driver and Application 6.8.1 Intel® Management Engine Components Installation The package of the In

IMBA-Q670 ATX Motherboard Page 135 Figure 6-28: Intel® ME Driver Welcome Screen Step 7: The license agreement in Figure 6-29 appears. Step 8: Read

IMBA-Q670 ATX MotherboardPage 136 Step 10: The Read Me file in Figure 6-30 appears. Step 11: Click Next to continue. Figure 6-30: Intel® ME Driver

IMBA-Q670 ATX Motherboard Page 137 Figure 6-31: Intel® ME Driver Setup Operations Step 14: The Finish screen in Figure 6-32 appears. Step 15: Select

IMBA-Q670 ATX MotherboardPage 138 6.8.2 Intel® IT Director Application Installation Intel® IT Director is an application that helps address key IT s

IMBA-Q670 ATX Motherboard Page 139 Figure 6-33: IT Director Welcome Screen Step 7: The license agreement in Figure 6-34 appears. Step 8: Accept th

IMBA-Q670 ATX MotherboardPage 140 Director application. Step 11: The Ready to Install the Program screen in Figure 6-35 appears. Step 12: Click Inst

IMBA-Q670 ATX Motherboard Page 141 Figure 6-36: IT Director Installation Complete Step 16: The Welcome Screen of the IT Director Configuration Tool

IMBA-Q670 ATX MotherboardPage 142 NOTE: It is recommended to open the Intel® IT Director Getting Started Guide shown in Figure 6-37 to fully unders

IMBA-Q670 ATX Motherboard Page 143 Figure 6-39: IT Director Configuration Complete Step 0: NOTE: If the network connection doesn’t work after insta

IMBA-Q670 ATX MotherboardPage xvi BIOS Menus BIOS Menu 1: Main ...

IMBA-Q670 ATX MotherboardPage 144 Appendix A A BIOS Options

IMBA-Q670 ATX Motherboard Page 145Below is a list of BIOS configuration options in the BIOS chapter. 　 System Overview ...

IMBA-Q670 ATX MotherboardPage 146 　 Target Temp. Sensor [CPU Temperature] ...

IMBA-Q670 ATX Motherboard Page 147　 Bootup NumLock State [On]...

IMBA-Q670 ATX MotherboardPage 148 Appendix B B One Key Recovery

IMBA-Q670 ATX Motherboard Page 149B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system

IMBA-Q670 ATX MotherboardPage 150 After completing the five initial setup procedures as described above, users can access the recovery tool by press

IMBA-Q670 ATX Motherboard Page 151partitions. Please take the following table as a reference when calculating the size of the partition. OS OS I

IMBA-Q670 ATX MotherboardPage 152  Linux o Fedora Core 12 (Constantine) o Fedora Core 11 (Leonidas) o Fedora Core 10 (Cambridge) o Fedora Core

IMBA-Q670 ATX Motherboard Page 153The detailed descriptions are described in the following sections. NOTE: The setup procedures described below a

IMBA-Q670 ATX Motherboard Page 1Chapter 1 1 Introduction

IMBA-Q670 ATX MotherboardPage 154 Step 2: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take

IMBA-Q670 ATX Motherboard Page 155 Figure B-4: Command Prompt Step 5: The command prompt window appears. Type the following commands (marked in red

IMBA-Q670 ATX MotherboardPage 156 Figure B-5: Partition Creation Commands

IMBA-Q670 ATX Motherboard Page 157 NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to

IMBA-Q670 ATX MotherboardPage 158 B.2.4 Building the Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system.

IMBA-Q670 ATX Motherboard Page 159Step 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In thi

IMBA-Q670 ATX MotherboardPage 160 B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system t

IMBA-Q670 ATX Motherboard Page 161 Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure B-13).

IMBA-Q670 ATX MotherboardPage 162 Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in

IMBA-Q670 ATX Motherboard Page 163 Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure B-17 prompts, click Hig

IMBA-Q670 ATX MotherboardPage 2 1.1 Introduction Figure 1-1: IMBA-Q670 The IMBA-Q670 is an ATX motherboard. It accepts a Socket LGA1155 Intel® Core

IMBA-Q670 ATX MotherboardPage 164 Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Crea

IMBA-Q670 ATX Motherboard Page 165Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step 0: Fi

IMBA-Q670 ATX MotherboardPage 166 Step 1: Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS, create partitions and install

IMBA-Q670 ATX Motherboard Page 167Step 4: Reboot the system from the recovery CD. When prompted, press any key to boot from the recovery CD. It wil

IMBA-Q670 ATX MotherboardPage 168 Figure B-26: Building the Auto Recovery Partition Step 7: After completing the system configuration, the follow

IMBA-Q670 ATX Motherboard Page 169Step 8: The Symantec Ghost starts to create the factory default image (Figure B-28). Figure B-28: Image Creation

IMBA-Q670 ATX MotherboardPage 170 BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit iEi Feature ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

IMBA-Q670 ATX Motherboard Page 171 Partition 1: /  Partition 2: SWAP NOTE: Please reserve enough space for partition 3 for saving recovery images

IMBA-Q670 ATX MotherboardPage 172 recovery partition. After completing the system configuration, press any key to reboot the system. Eject the recov

IMBA-Q670 ATX Motherboard Page 173 Step 7: The recovery tool menu appears. (Figure B-33) Figure B-33: Recovery Tool Menu Step 8: Create a factory

IMBA-Q670 ATX Motherboard Page 31.3 Features Some of the IMBA-Q670 motherboard features are listed below:  ATX form factor  RoHS compliant  LGA

IMBA-Q670 ATX MotherboardPage 174 Figure B-34: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Resto

IMBA-Q670 ATX Motherboard Page 175B.5.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1>

IMBA-Q670 ATX MotherboardPage 176 B.5.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press <Ent

IMBA-Q670 ATX Motherboard Page 177B.5.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <

IMBA-Q670 ATX MotherboardPage 178 B.5.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press &

IMBA-Q670 ATX Motherboard Page 179B.6 Restore Systems from a Linux Server through LAN The One Key Recovery allows a client system to automatically r

IMBA-Q670 ATX MotherboardPage 180 B.6.1 Configure DHCP Server Settings Step 1: Install the DHCP #yum install dhcp (CentOS, commands marked in red)

IMBA-Q670 ATX Motherboard Page 181filename “pxelinux.0”; B.6.2 Configure TFTP Settings Step 1: Install the tftp, httpd and syslinux. #yum install

IMBA-Q670 ATX MotherboardPage 182 Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/inetd

IMBA-Q670 ATX Motherboard Page 183B.6.4 Start the DHCP, TFTP and HTTP Start the DHCP, TFTP and HTTP. For example: CentOS #service xinetd restart #se

IMBA-Q670 ATX MotherboardPage ii Revision Date Version Changes 24 February, 2012 2.01 Modified Table 3-16: RS-422/485Connector Pinouts 9 September,

IMBA-Q670 ATX MotherboardPage 4 1.4 Connectors The connectors on the IMBA-Q670 are shown in the figure below. Figure 1-2: Connectors

IMBA-Q670 ATX MotherboardPage 184 Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes public

IMBA-Q670 ATX Motherboard Page 185Figure B-42: Disable Automatically Restart Step 2: Configure the following BIOS options of the client system.

IMBA-Q670 ATX MotherboardPage 186 MUST be installed in the system, otherwise, the system will automatically restore from the factory default image e

IMBA-Q670 ATX Motherboard Page 187 NOTE: A firewall or a SELinux is not in use in the whole setup process described above. If there is a firewall o

IMBA-Q670 ATX MotherboardPage 188 Step 5: When the following window appears, press <S> to select “Specify Additional Device”.

IMBA-Q670 ATX Motherboard Page 189Step 6: In the following window, select a SATA controller mode used in the system. Then press <Enter>. The

IMBA-Q670 ATX MotherboardPage 190 Appendix C C Terminology

IMBA-Q670 ATX Motherboard Page 191AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration

IMBA-Q670 ATX MotherboardPage 192 DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contac

IMBA-Q670 ATX Motherboard Page 193LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system

IMBA-Q670 ATX Motherboard Page 51.5 Dimensions The main dimensions of the IMBA-Q670 are shown in the diagram below. Figure 1-3: IMBA-Q670 Dimension

IMBA-Q670 ATX MotherboardPage 194 Appendix D D Digital I/O Interface

IMBA-Q670 ATX Motherboard Page 195D.1 Introduction The DIO connector on the IMBA-Q670 is interfaced to GPIO ports on the Super I/O chipset. The DIO

IMBA-Q670 ATX MotherboardPage 196 INT 15H Initiates the INT 15H BIOS call D.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H contr

IMBA-Q670 ATX Motherboard Page 197Appendix E E Watchdog Timer

IMBA-Q670 ATX MotherboardPage 198 NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for speci

IMBA-Q670 ATX Motherboard Page 199 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. EXAMPLE

IMBA-Q670 ATX MotherboardPage 200 Appendix F F Hazardous Materials Disclosure

IMBA-Q670 ATX Motherboard Page 201F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mer

IMBA-Q670 ATX MotherboardPage 202 Toxic or Hazardous Substances and Elements Part Name Lead (Pb) Mercury (Hg) Cadmium(Cd) Hexavalent Chromium(CR(VI)

IMBA-Q670 ATX Motherboard Page 203此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含

IMBA-Q670 ATX MotherboardPage 6 1.6 Data Flow 7Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on

IMBA-Q670 ATX Motherboard Page 71.7 Technical Specifications IMBA-Q670 technical specifications are listed below. Specification/Model IMBA-Q670 For

IMBA-Q670 ATX MotherboardPage 8 Specification/Model IMBA-Q670 Display port One VGA Integrated in the Intel® Q67 One HDMI Integrated in the Intel® Q

IMBA-Q670 ATX Motherboard Page 9Chapter 2 2 Packing List

IMBA-Q670 ATX MotherboardPage 10 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the E

IMBA-Q670 ATX Motherboard Page 112.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the

IMBA-Q670 ATX MotherboardPage 12 Quantity Item and Part Number Image 1 Quick Installation Guide Table 2-1: Packing List 2.4 Optional Items The f

IMBA-Q670 ATX Motherboard Page 13Item and Part Number Image Dual RS-232 cable (P/N: 19800-000051-RS) 20-pin INFINEON TPM module, S/W management to

IMBA-Q670 ATX Motherboard Page iiiCopyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to

IMBA-Q670 ATX MotherboardPage 14 Chapter 3 3 Connectors

IMBA-Q670 ATX Motherboard Page 153.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 IMBA-Q670 Layout The

IMBA-Q670 ATX MotherboardPage 16 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board. Connector Type Label

IMBA-Q670 ATX Motherboard Page 17Connector Type Label Serial port, RS-422/485 4-pin wafer COM4 Serial port, RS-232 10-pin box header COM1, COM

IMBA-Q670 ATX MotherboardPage 18 3.2 Internal Peripheral Connectors The section describes all of the connectors on the IMBA-Q670. 3.2.1 ATX Power Co

IMBA-Q670 ATX Motherboard Page 19Pin Description Pin Description 8 NC 20 NC 9 +5V 21 +5V 10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 GND Table 3-

IMBA-Q670 ATX MotherboardPage 20 Figure 3-3: Battery Connector Locations Pin Description 1 GND 2 Battery+ Table 3-4: Battery Connector (BT2) Pinou

IMBA-Q670 ATX Motherboard Page 21 Figure 3-4: CPU Power Connector Location PIN NO. DESCRIPTION 1 GND 2 GND 3 +12V 4 +12V Table 3-5: CPU Power

IMBA-Q670 ATX MotherboardPage 22 Figure 3-5: DDR3 DIMM Slot Locations 3.2.5 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header CN Locatio

IMBA-Q670 ATX Motherboard Page 23 Figure 3-6: Digital I/O Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 VCC 3 Output 3

IMBA-Q670 ATX MotherboardPage iv Table of Contents 1 INTRODUCTION...

IMBA-Q670 ATX MotherboardPage 24 Figure 3-7: CPU Fan Connector Location PIN NO. DESCRIPTION 1 GND 2 +12 V 3 FANIO1 4 PWM Table 3-7: CPU Fan Co

IMBA-Q670 ATX Motherboard Page 25 Figure 3-8: System Fan Connector Locations PIN NO. DESCRIPTION 1 FANIO 2 +12 V (PWM) 3 GND Table 3-8: System

IMBA-Q670 ATX MotherboardPage 26 Figure 3-9: Front Panel Audio Connector Location Pin Description Pin Description 1 LMIC2_L 2 AUD GND 3 LMIC2_R 4

IMBA-Q670 ATX Motherboard Page 27 Figure 3-10: Front Panel Connector Location FUNCTION PIN DESCRIPTION FUNCTION PIN DESCRIPTION Power LED 1

IMBA-Q670 ATX MotherboardPage 28 Figure 3-11: I2C Connector Location Pin Description 1 +5V_DUAL 2 PCH_GP38_PU 3 PCH_GP39_PU 4 GND Table 3-11: I2C

IMBA-Q670 ATX Motherboard Page 29 Figure 3-12: Keyboard/Mouse Connector Location Pin Description 1 +5 V KB DATA 2 MS DATA 3 MS CLK 4 KB DATA 5 KB

IMBA-Q670 ATX MotherboardPage 30 Figure 3-13: Parallel Port Connector Location Pin Description Pin Description 1 RSTROBE# 2 RPD0 3 RPD1 4 RPD2

IMBA-Q670 ATX Motherboard Page 31The PCI slot enables a PCI expansion module to be connected to the board. Figure 3-14: PCI Slot Locations 3.2.14 P

IMBA-Q670 ATX MotherboardPage 32 3.2.15 PCIe x4 Slot CN Label: PCIEX4_2 CN Type: PCIe x4 slot CN Location: See Figure 3-18 The PCIe x4 slot is fo

IMBA-Q670 ATX Motherboard Page 33 Figure 3-17: PCIe x16 Slot Location 3.2.17 SATA 3Gb/s Drive Connector CN Label: SATA34, SATA56 CN Type: 14-pin SA

IMBA-Q670 ATX Motherboard Page v3.2.11 Keyboard/Mouse Connector... 28 3.2.12

IMBA-Q670 ATX MotherboardPage 34 Figure 3-18: SATA 3Gb/s Drive Connector Location Pin Description Pin Description 1 GND 8 GND 2 SATATXP_A 9 SATAT

IMBA-Q670 ATX Motherboard Page 35 Figure 3-19: SATA 6Gb/s Drive Connector Location Pin Description 1 GND 2 SATATXP 3 SATATXN 4 GND 5 SATARXN 6 SATA

IMBA-Q670 ATX MotherboardPage 36 NOTE: These pins are shared with those on the main serial port. Use either the pins on the main connector, or on t

IMBA-Q670 ATX Motherboard Page 37 Figure 3-21: Serial Port Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 -NDCD1 6 -NCTS1 2 -N

IMBA-Q670 ATX MotherboardPage 38 Figure 3-22: SMBus Connector Location Pin Description 1 +5V_DUAL 2 SMBCLK 3 SMBDATA 4 GND Table 3-18: SMBus Conne

IMBA-Q670 ATX Motherboard Page 39 Figure 3-23: SPDIF Connector Location PIN DESCRIPTION 1 +5V 2 NC 3 SPDIFOUT 4 GND 5 SPDIFIN Table 3-19: SPD

IMBA-Q670 ATX MotherboardPage 40 Figure 3-24: SPI Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +3.3V 2 GND 3 SPI_CS0 4 SP

IMBA-Q670 ATX Motherboard Page 41 Figure 3-25: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 LCLK 2 GND2 3 LERAME# 4 KE

IMBA-Q670 ATX MotherboardPage 42 Figure 3-26: USB Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +5V 2 GND 3 DATA- 4

IMBA-Q670 ATX Motherboard Page 433.3.1 Audio Connector CN Label: AUDIO_CV1 CN Type: Audio jack CN Location: See Figure 3-27 The audio jacks connect

IMBA-Q670 ATX MotherboardPage vi 4.5 EXTERNAL PERIPHERAL INTERFACE CONNECTION ... 62 4.5.1 Audio Con

IMBA-Q670 ATX MotherboardPage 44 PIN DESCRIPTION PIN DESCRIPTION 3 MDIA2- 4 MDIA1- 5 MDIA1+ 6 MDIA2+ 7 MDIA0- 8 MDIA0+ Table 3-23: LAN P

IMBA-Q670 ATX Motherboard Page 45The HDMI port connects to an HDMI device. PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 HDMI_DATA2 13 N/C 2 GND

IMBA-Q670 ATX MotherboardPage 46 3.3.5 Serial Port Connectors (COM6) CN Label: COM6 CN Type: DB-9 connector CN Location: See Figure 3-27 CN Pinout

IMBA-Q670 ATX Motherboard Page 47PIN DESCRIPTION PIN DESCRIPTION 1 CRT_RED 2 CRT_GREEN 3 CRT_BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 +5V

IMBA-Q670 ATX MotherboardPage 48 Chapter 4 4 Installation

IMBA-Q670 ATX Motherboard Page 494.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IMBA-Q670 may

IMBA-Q670 ATX MotherboardPage 50 WARNING: The installation instructions described in this manual should be carefully followed in order to prevent d

IMBA-Q670 ATX Motherboard Page 514.2.1 Socket LGA1155 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the

IMBA-Q670 ATX MotherboardPage 52 Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sur

IMBA-Q670 ATX Motherboard Page 53 Figure 4-3: Insert the Socket LGA1155 CPU Step 8: Close the CPU socket. Close the load plate and pull the load le

IMBA-Q670 ATX Motherboard Page vii5.4 CHIPSET ...

IMBA-Q670 ATX MotherboardPage 54 4.2.2 Socket LGA1155 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan. The pre-i

IMBA-Q670 ATX Motherboard Page 55 Figure 4-6: Cooling Kit Support Bracket Step 2: Place the cooling kit onto the socket LGA1155 CPU. Make sure the

IMBA-Q670 ATX MotherboardPage 56 4.2.3 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-7. Figure 4-7: DIMM

IMBA-Q670 ATX Motherboard Page 574.3 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or

IMBA-Q670 ATX MotherboardPage 58 Setting Description Closed ATX power (Default) Open AT power Table 4-2: AT/ATX Power Mode Jumper Settings Figu

IMBA-Q670 ATX Motherboard Page 59 Figure 4-9: Clear BIOS Jumper Location 4.3.3 Wake-on LAN Jumper CN Label: WOL_SEL1 CN Type: 3-pin header CN Loca

IMBA-Q670 ATX MotherboardPage 60 Figure 4-10: Wake-on LAN Connector Pinout Locations 4.4 Internal Peripheral Device Connections This section outli

IMBA-Q670 ATX Motherboard Page 61Figure 4-11: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the

IMBA-Q670 ATX MotherboardPage 62 Figure 4-12: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section

IMBA-Q670 ATX Motherboard Page 63Step 2: Plug the audio plugs into the audio jacks. Plug the audio plugs into the audio jacks. If the plugs on your

IMBA-Q670 ATX MotherboardPage viii B.5.1 Factory Restore ...

IMBA-Q670 ATX MotherboardPage 64 Step 3: Insert the DVI-I connector. Once the connectors are properly aligned with the male connector, insert the m

IMBA-Q670 ATX Motherboard Page 65Step 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector should engage with a gentle pus

IMBA-Q670 ATX MotherboardPage 66 Figure 4-16: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cab

IMBA-Q670 ATX Motherboard Page 67 Figure 4-17: PS/2 Keyboard/Mouse Connector 4.5.6 Serial Device Connection The IMBA-Q670 has a single female DB-9 c

IMBA-Q670 ATX MotherboardPage 68 Figure 4-18: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the exte

IMBA-Q670 ATX Motherboard Page 69 Figure 4-19: USB Connector 4.5.8 VGA Monitor Connection The IMBA-Q670 has a single female DB-15 connector on the e

IMBA-Q670 ATX MotherboardPage 70 Figure 4-20: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to t

IMBA-Q670 ATX Motherboard Page 71process. Enter the Intel® current ME password as it requires (the Intel® default password is admin). NOTE: To chan

IMBA-Q670 ATX MotherboardPage 72 Chapter 5 5 BIOS

IMBA-Q670 ATX Motherboard Page 735.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system

IMBA-Q670 ATX Motherboard Page ixList of Figures Figure 1-1: IMBA-Q670...

IMBA-Q670 ATX MotherboardPage 74 Key Function Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup

IMBA-Q670 ATX Motherboard Page 755.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an ov

IMBA-Q670 ATX MotherboardPage 76 Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year

IMBA-Q670 ATX Motherboard Page 775.3.1 ACPI Settings The ACPI Settings menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface

IMBA-Q670 ATX MotherboardPage 78 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 4) to configure settings related to the Trusted C

IMBA-Q670 ATX Motherboard Page 79Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration >

IMBA-Q670 ATX MotherboardPage 80 Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration Intel

IMBA-Q670 ATX Motherboard Page 815.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of th

IMBA-Q670 ATX MotherboardPage 82 Î Disable Disables SATA devices. Î IDE Mode Configures SATA devices as normal IDE device. Î AHCI Mode DEFAULT C

IMBA-Q670 ATX Motherboard Page 83Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution